Nasıl çalışır? Sıcak ve soğuk su elektriği

Güneş enerjisi veya termal enerji dışındaki yenilenebilir enerji kaynakları (bkz.forums aşağıda adanmıştır): rüzgar türbinleri, deniz enerjileri, hidrolik ve hidroelektrik, biyokütle, biyogaz, derin jeotermal enerji ...
Owen
Ben econologic anlıyorum
Ben econologic anlıyorum
mesajlar: 170
yazıtı: 03/06/08, 08:16
Yer: Belçika

Nasıl çalışır? Sıcak ve soğuk su elektriği




yılından beri Owen » 04/06/09, 13:16

Bonjour

J'ai vu un prototype qui produit du courant électrique par eau chaude et froide.

bağlantı burada:

http://www.youtube.com/watch?v=SVRBKhK-jYU&hl=fr


Quelqu'un peut-il m'expliquer le fonctionnement de manièere vulgarisée ?

sağol
0 x
Christophe
arabulucu
arabulucu
mesajlar: 79126
yazıtı: 10/02/03, 14:06
Yer: gezegen Serre
x 10974




yılından beri Christophe » 04/06/09, 13:28

Bonne question je plusoye!

Je pensais à un stirling au début mais apparement c'est différent:

Video shows two buckets of water -- one hot, the other cold. As the two heat exchangers from the Ergenics apparatus are immersed into the two buckets, the temperature differential drives a turbine, powering a generator that powers the light.

Ergenics is developing a metal hydride heat engine (hu?) that converts the energy from hot liquid (e.g. solar hot water) into electricity for an estimated cost of about 1¢ per kilowatt hour. For example, solar panels produce hot water which is pumped to a hydrogen compressor that compresses a gas that is then expanded in a hydraulic motor-generator set that produces electricity.

The technology has a multitude of other applications and iterations. Please see http://www.ergenics.com


En y allant on y trouve pas grand chose comme info: http://www.ergenics.com/page27.htm

Le truc c'est dans le "hydride compressor" ...ah on dirait que cela joue via la T° sur la libération d'H2 stocké dans les hydrure métalique que sont les 2 serpentin ! C'est pas con du tout!

Il faut seulement inverser régulièrement les 2 sources chaude/froide (comme sur la vidéo) pour que cela marche en continu!

Faut peut être chercher du coté des brevets?
0 x
kullanıcı avatarı
Remundo
arabulucu
arabulucu
mesajlar: 15995
yazıtı: 15/10/07, 16:05
Yer: Clermont Ferrand
x 5189




yılından beri Remundo » 04/06/09, 13:47

Mais si les amis... c'est clair (suffisamment)...

C'est un système à absorption/désorption d'hydrogène d'un hydrure métallique (metal hydride).

En clair, l'hydrogène pénètre le métal à froid... puis on chauffe le métal et l'hydrogène désorbe à haute pression/température. On laisse détendre tout ça dans les moteurs pneumatiques. On refroidit...

Et on recommence.
Kompresör çalışıyor by, first, absorbing hydrogen gas directly into a metal material, thus forming an alloy of the metal and hydrogen called a "metal hydride". This process occurs at ambient temperature and generates some heat, which is rejected to the ambient air via the fan cooler. The metal hydride material is contained within patented very-high-surface-area heat exchangers which are alternately heated and cooled by recirculating water.

After the hydrogen has been fully absorbed and the heat exchanger cooled, hot water from the flat plate solar collectors is circulated through the heat exchangers. The elevated temperature increases the hydrogen pressure inside of the heat exchangers at an exponential rate. Multiple stages of compression designed with appropriate alloys can produce very high pressures using low temperature heat. The high pressure hydrogen is then passed through a hydraulic motor-generator set, which spins to produce electricity, before returning to the compressor in its initial, uncompressed state.

This compression/expansion heat engine cycle can be repeated indefinitely. In this way, the hydrogen gas is simply a "working fluid" that is neither created nor consumed, but only pressurized and expanded. The hydraulic fluid provides a convenient, economical and leak-free method of harnessing the work energy in the gas

ça marche sur le principe, reste à savoir le coût et le rendement. : Fikir:
Son düzenleyen Remundo 04 / 06 / 09, 13: 49, 1 kez düzenlenmiş.
0 x
Resim
Christophe
arabulucu
arabulucu
mesajlar: 79126
yazıtı: 10/02/03, 14:06
Yer: gezegen Serre
x 10974




yılından beri Christophe » 04/06/09, 13:47

T'es à la bourre Raymond... : Sevimsiz:

Le rendement doit pas être terrible (faible delta quoique vu les propriété de l'H2...un detla faible peut donner de bonnes détentes!) mais on s'enfou car si :

a) c'est pas cher
b) ce delta est faible, le potentiel d'application est immense!

Je m'inquiete plutot sur les fuites d'H2...dans la durée...
0 x
kullanıcı avatarı
Remundo
arabulucu
arabulucu
mesajlar: 15995
yazıtı: 15/10/07, 16:05
Yer: Clermont Ferrand
x 5189




yılından beri Remundo » 04/06/09, 13:52

Ne demek istiyorsun ? :P
0 x
Resim
Christophe
arabulucu
arabulucu
mesajlar: 79126
yazıtı: 10/02/03, 14:06
Yer: gezegen Serre
x 10974




yılından beri Christophe » 04/06/09, 13:56

Ben l'H2 finit par diffuser (c'est à dire s'échapper à terme) dans tous les matériaux, sauf ceux traités pour stocker de l'H2.

Alors est ce que toutes les pièces de la turbine et conduites ont été traitées ainsi...à voir, je spécule mais le doute est permis...
0 x
kullanıcı avatarı
Remundo
arabulucu
arabulucu
mesajlar: 15995
yazıtı: 15/10/07, 16:05
Yer: Clermont Ferrand
x 5189




yılından beri Remundo » 04/06/09, 14:03

Je partage tes inquiétudes techniques : Fikir:

Je ne sais pas pourquoi il faut toujours le mot "hydrogen" ou "metal hydride" pour paraître performant (en pratique, c'est souvent le contraire)... :?

Par contre, le principe d'exploiter des faibles deltaT est viable et c'est plutôt l'affaire des Stirling.

@+
0 x
Resim
Christophe
arabulucu
arabulucu
mesajlar: 79126
yazıtı: 10/02/03, 14:06
Yer: gezegen Serre
x 10974




yılından beri Christophe » 04/06/09, 14:06

Je pense pas, vu le site et les vidéo, que ces recherches soit faite à coup de "millions de budget".

Je pense que c'est une bonne invention d'un inventeur indépendant, à voir la viabilité technico-economique...par rapport au stirling justement qui déjà n'arrivent pas à percer!
0 x
Owen
Ben econologic anlıyorum
Ben econologic anlıyorum
mesajlar: 170
yazıtı: 03/06/08, 08:16
Yer: Belçika




yılından beri Owen » 04/06/09, 14:07

Je pensais me faire lincher par les experts du site.

Je vois que le sujet attire.

Merci pour ces brève explication.

Pour les ballon d'eau chaude en été.

Cela ne serait-il pas un moyen intelligent d'utiliser l'excès d'eau chaude des ballons en été ?
0 x
Christophe
arabulucu
arabulucu
mesajlar: 79126
yazıtı: 10/02/03, 14:06
Yer: gezegen Serre
x 10974




yılından beri Christophe » 04/06/09, 14:09

Ben pkoi lyncher? Quand c'est pas du flan (et s'en est pas) y a aucune raison qu'on lynche!

Expert, expert...euh faut voir : Sevimsiz:
0 x

 


  • Benzer konular
    Cevaplar
    İzlenme
    Son Mesaj

Geri "hidrolik, rüzgar, jeotermal, deniz enerjisi, biyogaz ..."

Kimler?

Bunu gezen kullanıcılar forum : Google [Bot] ve 172 misafir